How to Reduce Fleet Downtime: 6 Lessons From Fleet Leaders
Thought Leadership · November 16, 2026 · Draiver · 9 min read
Fleet downtime is one of the most expensive and least measured costs in fleet operations. Every day a vehicle sits between assignments waiting for a move, an approval or paperwork is a day it costs money without earning any.
In a live poll during our Draiver Talks webinar Fast Fleets Earn First, about half of the fleet professionals who responded said more than 10 days pass between a vehicle becoming available and being in service. We asked leaders from Element Fleet Management and Draiver where those days go and how the best fleets get them back.
This guide is for fleet managers, operations directors and logistics leads at corporate fleets, rental companies, leasing companies and OEMs.
Watch the full panel: Fast Fleets Earn First · Draiver Talks webinar series (55 min)
The panel
- Phillip Sadberry, J.D., Director of Mobility Solutions Development, Element Fleet Management
- Peter Janczewski, Senior Vice President of Sales, Draiver
- Dan Rizzo, Chief Operating Officer, Draiver
- Anoop Tiwari, Moderator, AutoMobility Advisors
What causes fleet downtime?
When fleets talk about reducing downtime, the conversation usually turns to transport speed or repair times. In practice, the largest delays happen in between: waiting for approvals, scheduling pickups, completing paperwork and handing vehicles from one team or vendor to the next. Every handoff is a place where days can disappear without anyone owning them.
Where the days go
- Vehicle available
- Approval — waiting
- Pickup scheduling — waiting
- Transport — moving
- Paperwork (Title & registration, inspections) — waiting
- Destination ready — waiting
- In service
Transport is often the shortest step. Most days are lost waiting between steps.
The most common causes are:
- Approvals and decisions that sit in someone's inbox
- Pickup scheduling and back-and-forth to confirm a vehicle is ready to move
- Paperwork, including title and registration, inspections and proof of delivery
- Handoffs between in-house teams, transport providers, shops and auctions
- Quoting delays, when teams wait hours for a transport price before they can book a move
- Destinations that aren't ready, such as a shop without capacity or a lot without space
How much does fleet downtime really cost?
The obvious cost of a late vehicle is the rental that covers the gap. Phillip Sadberry of Element Fleet Management explained that it's only the start:
| Cost | Why it adds up |
|---|---|
| Replacement rental | Covers the vehicle that isn't in service |
| Rental insurance | Paid on top of insurance for the idle vehicle |
| Storage | For vehicles the fleet owns or leases but can't use yet |
| Risk exposure | Vehicles parked overnight on lots or in transit can be vandalized, stolen or damaged by weather |
| Insurance premiums | More exposure over time pushes premiums, or self-insurance costs, up |
| Rushed downstream work | A late vehicle can force a two-to-three-week title and registration process into a few days |
What is waiting costing your fleet? Our team can map where your vehicles wait and what it's costing you. Talk to our team
How to measure fleet downtime: when does the clock start and stop?
You can't reduce what you don't measure, and many fleets don't agree on what to measure.
For Element, the clock starts when the vehicle is made available and the move request is sent, unless the request sets a later date. It stops only when the vehicle is at its destination and no additional work is needed because of the move. If a vehicle arrives damaged, it isn't ready to use, so the clock keeps running.
Dan Rizzo, Draiver's COO, noted that the start and stop points depend on the business. For an OEM, the clock may start when a vehicle comes off the production line and stop when it reaches the dealer or end customer. The key is agreeing on the definition, internally and with every vendor, before you measure.
Useful KPIs to track:
- Time to in-service: days from vehicle availability to ready-to-work
- Request-to-pickup time: how long vehicles wait before a move starts
- First-attempt delivery rate: moves completed without a rejected drop-off or return trip
- Dry run rate: moves where the driver arrives and the vehicle isn't there or isn't ready
- Cost per move, including driver repositioning
6 ways best-in-class fleets reduce downtime
1. Build a defined process, clear KPIs and disciplined communication
Across the fleet operators Draiver works with, Peter Janczewski, Senior Vice President of Sales, sees the same three traits in the fastest ones: a defined process, clear KPIs and strong communication. Process can mean integrations and APIs that pass information between organizations without manual re-entry. KPIs vary by sector: a corporate fleet may focus on in-fleeting and de-fleeting speed, while a remarketing operation focuses on getting units to auction faster.
The impact can be dramatic. With a partner in Latin America, Draiver helped cut the time to get vehicles from the plant to fleet customers from about 30 days to about 5.
Phillip put communication at the center: tell partners and vendors exactly who to contact, how and when, and make sure that person is available to respond. "If you have a good process, and good communication, and then you track your KPIs, you're gonna do good things," he said. Even when errors happen, you'll spot them quickly.
2. Don't move faster than the destination can receive
Speed only helps if the destination is ready. If a shop can't take a vehicle for two days, delivering it today means a rejected drop-off, a trip back to storage and a second delivery: two moves and more cost for the same result. "It doesn't matter how quickly we can get them there, it just matters when we can deliver them," Phillip said.
3. Optimize for cost when you don't need speed
The longer you can wait to move a unit, the more likely another vehicle is heading the same way, so moves can be grouped and chained. That cuts one of the least visible costs in vehicle logistics: repositioning the driver after the drop-off. In Draiver's experience, the tipping point is around four to five days; beyond that, waiting rarely creates more chaining opportunities.
The right question is what you're optimizing for. If a customer is waiting at a rental counter, move the vehicle now. If not, optimize for cost.
→ Talk to our team about chaining moves for your fleet
4. Never trade accuracy, safety or compliance for speed
Accuracy. Many fleets name locations by store number. Type store 5671 instead of 5761 and the vehicle can end up in a different state. Telematics and location capture at every scan help validate moves, but a wrong delivery still has to be fixed.
Safety. About half of Draiver's dry runs, where a driver is dispatched and the vehicle isn't there, happen because the vehicle isn't at the pickup location. Safety also covers the handoff: with vehicle fraud rising, verifying that whoever takes custody is who they say they are and is authorized to move the vehicle is critical.
Compliance. Hours-of-service limits exist for safety. A client may want a vehicle today, but a driver can only drive so many hours.
5. Track end-to-end KPIs, not just SLAs
Imagine a move where the SLA allows three days from notification to pickup, five from pickup to scheduled delivery and three from scheduled to actual delivery. A move that could take three days now takes eleven, and every supplier met its SLA. "They're meeting your SLA, but they're defeating you," Phillip said.
SLA STACKING
Meeting every SLA can still cost you 8 days
Each supplier hits its own target, but the clock restarts at every handoff. Shorter bar = vehicle back in service sooner.
Shorter is better.
Siloed suppliers (what the SLAs allow): Pickup SLA · 3 days + Transport SLA · 5 days + Delivery/prep SLA · 3 days = 11 days.
Coordinated move (what the work actually needs): 3 days.
8 days of avoidable waiting
Scale: 0, 2, 4, 6, 8, 10, 11 days.
Illustrative example from the Draiver Talks panel. Every supplier met its SLA; the fleet still waited 8 extra days.
Complement SLAs with end-to-end KPIs and consider pricing models that reward performance, such as miles moved per day. Peter added that weekly or monthly reviews with partners catch these gaps before they become the norm.
6. Choose partners who share the whole story
"Every VIN tells a different story," Peter said. Between pickup and delivery there may be inspections, smog tests, title work and other tasks. Choose partners who give you real-time visibility into every step and share that data with you and your customers. Draiver's Command Center gives fleets one view of every move, with real-time tracking and digital condition inspections at each handoff.
See every vehicle move end to end Real-time tracking, digital inspections at every handoff and one platform for every move. Request a Demo
Does fleet downtime change with autonomous vehicles?
Autonomous vehicles don't remove the need for people; they change where people are needed. A camera covered by a bug, a door left open or a minor accident can leave an AV stuck, and cities increasingly expect operators to resolve a stalled vehicle within minutes. Dan compared human field operators to what data centers are for AI: the physical layer that keeps the technology running. AVs also still need to be moved between markets; Draiver recently had a driver move an autonomous box truck from the Ohio–Pennsylvania area to Georgia. Learn more about Draiver for autonomous vehicles.
How EVs affect fleet downtime
EVs mostly add time on long moves. Charging takes longer than refueling, especially at stations not optimized for the vehicle. When a client asked Draiver to drive an EV about 1,500 miles, the team estimated around six days of driving and recommended a car hauler instead, which was faster and more cost-effective. EVs also add a pickup risk: the battery level reported in advance doesn't always match what the driver finds.
A 30-day plan to reduce fleet downtime
- Measure the process and find the waste. "It's there, I promise you," Phillip said. Map every step from availability to in-service and find where vehicles wait.
- Define your clock internally and with every vendor.
- Pick a North Star metric, such as time to in-service, and the inputs that move it (Dan).
- Get instant quotes so pricing never holds up a move.
- Review vendors on end-to-end KPIs every week or month, not just SLA compliance.
- Choose partners who share data in real time.
→ Want help with step 1? Talk to our team
Frequently Asked Questions
What is fleet downtime?
Fleet downtime is the time a fleet vehicle is unavailable to do the work it was acquired for. It includes repairs and maintenance, plus the time vehicles spend waiting for transport, approvals, paperwork or a destination that's ready to receive them.
What causes fleet downtime?
The biggest causes are usually not transport speed but waiting: approvals, pickup scheduling, paperwork such as title and registration, quoting delays and handoffs between teams and vendors.
How much does fleet downtime cost?
Beyond a replacement rental, a vehicle out of service adds rental insurance, storage, exposure to theft, vandalism and weather, and over time can raise insurance premiums or self-insurance costs.
How long does it take to get a fleet vehicle into service?
It varies widely. In a live poll during the Draiver Talks webinar, about half of respondents said more than 10 days pass between a vehicle becoming available and being in service.
How do you measure fleet downtime?
Start the clock when a vehicle is made available and the move request is sent, and stop it when the vehicle is at its destination and ready to work with no extra work needed. Track time to in-service, request-to-pickup time, first-attempt delivery rate and dry run rate.
How can fleets reduce downtime?
Define a clear process, track end-to-end KPIs, communicate clearly with vendors, avoid moving vehicles before the destination is ready, chain moves when there's no urgency, and work with partners that share real-time data.
Can a supplier meet its SLA and still increase fleet downtime?
Yes. If every step uses its full SLA window, a move that could take three days can take eleven. End-to-end KPIs prevent this.
Will autonomous vehicles still need drivers?
Yes. Autonomous fleets need people to recover stuck vehicles, reposition them and move them between markets.
How do EVs affect fleet logistics?
On long distances, charging adds time, and battery levels at pickup don't always match what was reported. For very long moves, a car hauler can be faster and more cost-effective than driving.